C&H Precision HNT-R Max Red Dot Optic

Built for hunters who want a red dot that survives the recoil, the rain, and the cold sit, not a duty optic in camouflage paint

The C&H Precision HNT-R Max is a purpose-built hunting red dot. The 24mm window gives you the lateral real estate to pick up the dot fast on a flushed bird, a deer breaking cover, or a hog at the feeder, and the multi-reticle 2.5 MOA dot inside a 24 MOA circle lets you choose precision or speed depending on the shot. The housing is machined from a single piece of 7075-T6 aircraft-grade aluminum, rated for +P and +P+ recoil, sealed to IPX7, and finished in TrueTimber Strata camouflage so the optic disappears against the tree line instead of flagging movement.

The HNT-R Max uses the RMSc footprint, the most widely supported subcompact pistol optic pattern in the industry. That means it drops onto optics-ready handguns cut for RMSc, and it pairs onto shotguns, lever-action rifles, and scout-style rifles through standard RMSc-cut adapter plates. One footprint, one optic, multiple host platforms across the season.

Key Features

• 24mm Lens Window. A wider lateral sight picture than a standard tube-style micro red dot, built for hunters who need to track a moving target across cover and brush instead of fishing for the dot.
• 2.5 MOA Dot with 24 MOA Circle Multi-Reticle. The 2.5 MOA dot holds for precise shots out to ethical hunting ranges. The 24 MOA circle gives you a broad reference for fast close-cover shots on flushing birds, running game, or ambush-distance hogs. Both reticles are visible together in multi-reticle mode.
• RMSc Footprint. Drops onto any optics-ready handgun cut for the RMSc pattern, the most widely supported subcompact pistol footprint, and pairs onto shotguns, lever-action rifles, and scout-style rifles via RMSc-cut adapter plates.
• 50,000-Hour Battery Life. A single CR1632 3V lithium cell runs the optic for over 5.7 years of continuous use on the lowest setting. You can leave the optic in your safe between seasons without burning through batteries.
• Motion-Activated Shake Awake. The HNT-R Max powers on instantly when it detects movement. No button press, no warm-up lag, no dead reticle on a sudden flush.
• 10 Brightness Settings with Night Vision Compatibility. Adjustable from bright daylight on snow to near-dark at last shooting light. Settings 1 and 2 are night vision compatible for predator hunting under a passive NV setup.
• Smart Power Management. Powers down automatically after 5 minutes of no detected motion, then wakes the moment you pick up the gun. Conserves the battery on long stand sits without manual switching.
• Rated for +P and +P+ Loads. Built to survive the recoil of high-pressure ammunition, including the heavy buckshot and slug loads typical on a hunting shotgun.
• IPX7 Waterproof. Fully sealed and submersible to 1 meter for 30 minutes. Holds up to a steady soaker on a duck blind, a dunked stand bag, or a snowed-in lever rifle.
• 1.59 oz Weight. Light enough to ride on a subcompact hunting handgun without dominating the slide, and barely felt on a shotgun receiver or rifle rail.
• 7075-T6 Single-Piece Housing. CNC-machined from one piece of aircraft-grade aluminum for maximum rigidity. Per C&H, the housing is rated to survive 1,500 g of force across 1,000 repetitions without losing zero or function.
• TrueTimber Strata Camouflage Finish. Visual concealment integrated into the housing finish, not a wrap or sleeve. Breaks up the optic's outline against bark, brush, and broken cover instead of flagging movement.
• Made in the USA. Manufactured domestically by C&H Precision Weapons in Richmond Hill, Georgia.
• C&H Precision Optics Warranty. The metal housing and optical glass are covered for the life of the product against defects in materials. The LED illumination system is warranted for 5 years from the manufacture date. Registration with C&H Precision is required to validate.

Who the HNT-R Max Is For

Is the HNT-R Max the right red dot for shotgun hunting?

For turkey, waterfowl, slug-gun deer, and upland bird shotguns, yes. The 24mm window is wide enough to track a flushed bird or a moving deer through the mount and follow-through, and the IPX7 waterproof seal holds against a duck-blind soaker or snow-soaked goose pit. The +P and +P+ recoil rating is built to survive the heavy buckshot and slug loads that hunting shotguns put on an optic.

Is the HNT-R Max the right red dot for handgun hunting?

For optics-ready hunting handguns cut for the RMSc footprint, yes. The 1.59 oz weight keeps the optic from dominating a subcompact or compact hunting pistol's slide, and the 2.5 MOA dot inside the 24 MOA circle gives you a precise hold for the deliberate shot of a handgun hunt. RMSc is the most widely supported subcompact pistol optic footprint, so direct-mount fit is broad before you even reach for an adapter plate.

Is the HNT-R Max the right red dot for lever-action hunting?

For brush-gun lever rifles in calibers like .30-30, .35 Rem, .45-70, and pistol-caliber lever guns paired to an RMSc-cut adapter plate or rail mount, yes. The 50,000-hour battery life on a single CR1632 lets you leave the optic mounted across the off-season without battery rotation, and the motion-activated Shake Awake means the dot is live the instant you bring the rifle to your shoulder on a deer breaking through a clearing.

Is the HNT-R Max the right red dot for scout-style rifle setups?

For scout-style rifles built around forward-mounted optics with both eyes open, yes. The 1x magnification and 33-yard parallax-free design support rapid target acquisition at the close-to-mid ranges scout rifles are designed for, and the 24mm window gives the wide field of view a scout rifle's "shoot with both eyes open" doctrine depends on. RMSc-footprint scout-rail or rail-section adapter plates are the bridge between the HNT-R Max and standard scout rifle mounts.

Compatibility

The HNT-R Max uses the RMSc footprint, which is supported by:

• Optics-ready subcompact and compact handguns cut for RMSc, including most current Springfield Hellcat, Sig P365 series with RMSc cut, Glock 43X MOS / 48 MOS, Smith & Wesson Shield Plus, Walther PDP F-Series, and Taurus GX4 variants. Confirm your specific slide cut, since RMSc is the most widely supported subcompact footprint but not universal.
• Hunting and sporting shotguns paired to RMSc-cut adapter plates. C&H produces RMSc-footprint adapter plates for the Mossberg 940, Mossberg 590, and Remington V3 Field Pro platforms.
• Lever-action rifles paired to a Picatinny-to-RMSc or scout-rail adapter plate appropriate for the host receiver.
• Scout-style rifles using forward-mounted scout-rail-to-RMSc adapter plates.
• Custom-milled RMSc-footprint slides and host platforms.

Reviewed by Taylor Winston, 2A Daddy owner and Tennessee FFL dealer. The HNT-R Max ships with minimal printed documentation and the multi-reticle mode switch takes a moment of figuring out the first time. C&H's install and operation videos cover the controls clearly, and once the reticle preference is set the in-hand window clarity and Shake Awake responsiveness make up the difference for any hunting use.